Specification:
SPD TOP 1P APES is a full-cycle top-lighting solution for comercial canabis cultivation,with the power to scale from vegetative growth to higher light intensities in bloom. For optimal results,we recommend SPD TOP 1P APES deployed in enviroments with CO2 supplementation between 800-1400 ppm in reproductive growth stage due to high PPFD levels.
SPD TOP 1P APES builds on the previous generation’s SPA/SPB/SPCx PLUS performance.
Parameters:
Specifications
| Light source | LED Samsung / Osram leds+660nm |
| Spectrum | SPF 2-FLW Indoor(TM) |
| Light Output PPF | 1500μmol/s |
| Efficacy | 2.8μmol/J@220V AC |
| AC Output Power | 630W±5%@220V AC |
| AC Input Voltage | 100-277V AC,50/60Hz
347-480V AC,50/60Hz |
| Light Distribution | 120° |
| Mounting Height (Above Canopy) | 24〞-72〞(600-1800mm) |
| Thermal Management | Passive |
| Max.Ambient Temperature | 162°F/60℃ |
| Dimming | 0/1-10V-source+/RJ14 controller |
| Total Harmonic Distortion(THD) (Fulll Load) | <10% |
| Lifetime | L80:>50,000hrs |
| IP Rating | IP65 |
| Certifications | UL8800、UL1598 Wet Location/ETL |
| Warrenty | 5 year Stantard Warranty |
Electrical Specifications
| Ac Voltage | 120V | 208V | 220V | 277V | 380V | 480V |
| AC Current | 5.25A | 3.01A | 2.82A | 2.23A | 1.62A | 1.28A |
| AC power | 630W | 626W | 620W | 618W | 615 | 612 |
| Power Factor | 0.99 | 0.99 | 0.98 | 0.99 | 0.98 | 0.97 |
| Family | Model | Spectrum | Input Voltage | Ac Power Cord |
| SPF TOP APES | 10p 10p | SPE 1-FLW Indoor™ SPE 2-FLW Indoor™ |
1 100-277V | 01 5ft(1.525m) |
| 2 347-480V | 02 10ft(3.05m) |
Options
| AC Plug Type | Mounting Hardware | Packing |
| N5-15 NAME5-15P
N6-15 NAME 6-15P PTP Pigtails NL7-15P NAME L7-15P |
SWR Steel Wire Rope
MLS Manual Lifting Sling |
S Single |
PPFD
PPFD of SPD TOP 1P APES
(630W)
Footprint:6ft*4ft@veg;5ft*3ft@bloom
Control system
Lighting Solutions are Designed to Effectively Support Photosynthesis While Offering Dynamic Spectrum Control Where Specific Spectral Ratios can be Created to Direct Plant Growth and Promote Healthy Plant Development. Fixtures areEngineered for Both Indoor (Sole-Source) and Greenhouse Cultivation, Directing light Within the Photosynthetically Active Radiation Region, Which Refers to the light Utilized by Plants for Photosynthesis. For Indoor Cultivation, has Included White light into our Standard Spectrum to Provide for Plant Metabolic Processes, While Focusing light Within red and Blue PAR Bands to Drive Photosynthesis, lighting Strategies are also Built to Significantly Reduce Energy Consumption and Associated Electrical Infrastructure Costs.
Proposal
| 1 | Ideal working hours:Vegetables 14-16 hours/Flowers 12 hours |
| 2 | The working environmeng for the lights:-20~40℃，45%RH-90%RH |
| 3 | Don’t touch or move when the lights working |
Tips
| 1 | Recommended indoor working temperature:Daytime:22-28 degrees/Night 20-22 degree |
| 2 | Recommended carbon dioxide concentration:1200 to 1500 ppm. |
| 3 | Recommended hydraulic VPD:1.0-1.49 kPa/Night:0.8-1.2kPa |
| 4 | Recommended relative humidity:Leaf stage:75-80%/Pre-Flowering stage:60-70%/Late Flowering 50-55% |
Installation
Light On/Off Suggestions
| Seeding | 20hours/4 hours or 18 hours/6 hours |
| Vegetative | 20hours/4 hours or 18 hours/6 hours |
| Flowering | 12 hours / 12 hours |
Dimensions&Standard accessories
| Part | Length | Width | Heigth | Weight |
| Total | 3.78”
1230mm |
2.00”
235mm |
0.67”
160mm |
N.W:9.1Kg G.W:10.5Kg |
